Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
In this case the wire connected to the negative side of the battery has been disconnected, so we need to solder it back on. But before we do that we need to strip the black wire. Use a razor knife or wire stripper to strip about a 1/4 - 1/2 of an inch off the end.
Step 3
  • In this case the wire connected to the negative side of the battery has been disconnected, so we need to solder it back on.

  • But before we do that we need to strip the black wire. Use a razor knife or wire stripper to strip about a 1/4 - 1/2 of an inch off the end.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.