Ga door naar hoofdinhoud
Engels
Nederlands

Stap 3 vertalen

Stap 3
Pull the flash capacitor out of its compartment to expose the wires connected to it. Cut the connecting wires with wire cutters. Solder the wires to the new power source with a soldering iron and electrical solder.
  • Pull the flash capacitor out of its compartment to expose the wires connected to it.

  • Cut the connecting wires with wire cutters.

  • Solder the wires to the new power source with a soldering iron and electrical solder.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.