Ga door naar hoofdinhoud

Toniebox Teardown


= Klaar = Onvolledig

    Beschrijf het specifieke gedeelte of onderdeel van deze device waar u mee bezig bent. Voorbeeld: batterij

    Maak een titel aan.

    Deze korte samenvatting zal enkel in zoekresultaten verschijnen.

    Geef achtergrondinformatie weer voordat de lezer de handleiding induikt.


    Stap 1

    The Toniebox is designed as an audiobook player for kids (age three and up), and packs the following features:

    Stap 2

    Because we're doing this teardown in Germany, we'll forgo the usual metric and imperial measuring shenanigans and simply give you a banana for scale.

    Stap 3

    The cover on the bottom is as stubborn as a pickle jar. But hey, we have seen far worse opening procedures! Besides, the rest looks pretty easy.

    Stap 4

    Now for the "unboxing".

    Stap 5

    The battery pack and motherboard are secured with just two standard Phillips screws.

    Stap 6

    We'll have a look at that motherboard just as soon as these stubborn little cables are unplugged. Let's see what all the noise is about! Onboard we find:

    Stap 7

    And now for the Toniebox's vocal cords!

    Stap 8

    Just four more Phillips screws, and we can remove the cap.

    Stap 9

    Next we inspect the volume control buttons, located (rather appropriately) in the ears of the Toniebox.

    Stap 10

    Bonus teardown: We perform minor surgery on the lion figurine and find, as expected, an NFC chip in his stomach.

    Stap 11 — Final Thoughts

    That's all, folks! We completely tore down our Toniebox, cut open the lion, and spread everything over the table. Here is our result:

    Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.