Ga door naar hoofdinhoud
Engels
Nederlands

Stap 5 vertalen

Stap 5
Locate the speaker and connected haptic motor on the lower PCB of the phone. Using an opening tool, lightly pry around all edges of the PCB until it releases from the adhesive backing. Use the same process as above to remove the Haptic motor.  It has the black and red wire connected to it and the PCB.
  • Locate the speaker and connected haptic motor on the lower PCB of the phone.

  • Using an opening tool, lightly pry around all edges of the PCB until it releases from the adhesive backing.

  • Use the same process as above to remove the Haptic motor. It has the black and red wire connected to it and the PCB.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.