Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
Gently flip the tan cable lock back to release the ribbon cable from the lower PCB Board. Using a spudger, gently pull the ribbon cable from its socket. Remove the 3mm screw from the PCB using a Phillips #000 screwdriver.
  • Gently flip the tan cable lock back to release the ribbon cable from the lower PCB Board.

  • Using a spudger, gently pull the ribbon cable from its socket.

  • Remove the 3mm screw from the PCB using a Phillips #000 screwdriver.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.