Ga door naar hoofdinhoud
Engels
Nederlands

Stap 2 vertalen

Stap 2
Remove the 4 pin female connector from the male connector attached to the motherboard. Lift the DC power port from the bracket holding it in place.
  • Remove the 4 pin female connector from the male connector attached to the motherboard.

  • Lift the DC power port from the bracket holding it in place.

  • There are black plastic housings for the wires, holding the wires in position. Remove the red and black wires connecting the DC Port to the 4-pin power connector from underneath the black plastic housings.

  • Remove the DC Power port and 4 pin connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.