Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Turn the device so that the back cover is facing you and locate the two screws at the top of the back cover. Using the Phillips #000 screwdriver, loosen the screws on the back cover. The screws do not come out, but may be loosened to allow for the back cover to be removed.
  • Turn the device so that the back cover is facing you and locate the two screws at the top of the back cover.

  • Using the Phillips #000 screwdriver, loosen the screws on the back cover.

  • The screws do not come out, but may be loosened to allow for the back cover to be removed.

  • Gently pry the tabs on the side of the device with the metal spudger or your thumbnail and lift off the back cover.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.