Ga door naar hoofdinhoud

Joy-Con 卡扣更换指南

Stap 2
Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 1 van 3 Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 2 van 3 Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 3 van 3
Separate the halves of the Joy-Con
  • Insert an opening pick into the seam at the bottom edge of the controller (opposite the L and ZL buttons).

  • Slowly slide the flat edge of your opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens easily, so not much pressure is needed.

将三角撬片插入控制器底部边缘的接缝中(L 和 ZL 按钮对面)。

慢慢地将开口的平边滑动到 Joy-Con 的一侧。

小心不要将三角撬片滑入 Joy-Con 内太远。这可能会损坏内部组件。后面板很容易松动,因此不需要太大的压力。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.