Repareer je spullen Gemeenschap Winkel

Joy-Con 버클 잠금 교체

Terug naar de handleiding
Engels
Koreaans
Stap 2
Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 1 van 3 Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 2 van 3 Joy-Con Buckle Lock Replacement, Separate the halves of the Joy-Con: stap 0, afbeelding 3 van 3
Separate the halves of the Joy-Con

  • Insert an opening pick into the seam at the bottom edge of the controller (opposite the L and ZL buttons).

  • Slowly slide the flat edge of your opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens easily, so not much pressure is needed.

Joy-Con 절반 분리하기

컨트롤러 하단 가장자리 접합 부분에 여는 픽을 끼우세요 (L 그리고 ZL 버튼 반대편).

여는 픽의 평평한 모서리를 Joy-Con 측면에서 천천히 밀어 올리세요.

여는 픽을 Joy-Con 내부에 너무 깊숙이 밀어 넣지 않도록 주의하세요. 내부 부품을 손상할 수 있습니다. 후면 패널은 아주 쉽게 떨어지기 때문에 많은 힘이 필요하지 않습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.