Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Remove the two T8 Torx screws securing the PRAM battery & USB board to the lower case. Pull the board away from the side of the lower case to separate the USB socket from the bezel on the lower case.
  • Remove the two T8 Torx screws securing the PRAM battery & USB board to the lower case.

  • Pull the board away from the side of the lower case to separate the USB socket from the bezel on the lower case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.