Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 5 vertalen

Stap 5
On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips head #2 bit (labeled PH2 in the Pro Tech Toolkit). Pry up at the location marked, and remove the plastic end cap. The white plastic section houses the USB micro B, and must be replaced as a whole.
  • On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips head #2 bit (labeled PH2 in the Pro Tech Toolkit).

  • Pry up at the location marked, and remove the plastic end cap.

  • The white plastic section houses the USB micro B, and must be replaced as a whole.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.