Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Use the edge of an opening tool to push the back cover antenna connector away from the frame. It is located on the top edge of the frame. Remove the back cover antenna connector. If you are transferring the connector onto a replacement frame, peel the blue liner on the top edge of the replacement frame before sticking the connector onto the edge.
  • Use the edge of an opening tool to push the back cover antenna connector away from the frame. It is located on the top edge of the frame.

  • Remove the back cover antenna connector.

  • If you are transferring the connector onto a replacement frame, peel the blue liner on the top edge of the replacement frame before sticking the connector onto the edge.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.