Ga door naar hoofdinhoud

iMac Proの分解

Stap 6
iMac Pro Teardown: stap 0, afbeelding 1 van 3 iMac Pro Teardown: stap 0, afbeelding 2 van 3 iMac Pro Teardown: stap 0, afbeelding 3 van 3
  • AirPort card functions are consolidated onto the main board—for some unknown reason, Apple ditched the modularity from the 5K model. But we did pick up this funky new retaining clip for the coax cables.

  • The power supply connects to the logic board by way of not one, not two, but four shiny terminals secured with Torx screws.

  • This design is much closer to what we saw on the 2013 Mac Pro than the plasticky connectors we're used to ripping out of the iMac 5K.

  • It also makes accessing logic board components (apart from the RAM of course) much, much easier. With the power supply tucked back into the rear shell, we can remove the board right away. Let's do that!

AirPortカード機能は、理由は分かりませんがメインボード上に搭載されています。Appleは5Kモデル以降モジュールを廃止しました。しかし同軸ケーブル用の風変わりな新固定クリップがあります。

電源は1つでもなく、2つでもなく、トルクスネジで固定された4つの輝く端末を経由して基板に繋がっています。

基板のコンポーネントにアクセスするのは(もちろんRAMとは別に)とても簡単です。電源が裏側に押し込まれているため、すぐに基板を取り外せます。早速取り掛かりましょう!

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.