Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Unscrew the 9.5 mm screws from heatsink on both sides using the Phillips #2 screwdriver. If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device. If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device.
  • Unscrew the 9.5 mm screws from heatsink on both sides using the Phillips #2 screwdriver.

  • If the processor is glued on to the heat sink, gently scrape off the glue and detach it from the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.