Ga door naar hoofdinhoud

iRobot Roomba 890 IR Sensor Replacement

Wat je nodig hebt

  1. iRobot Roomba 890 IR Sensor Replacement, IR sensor: stap 1, afbeelding 1 van 1
    • Use a Phillips #2 screwdriver to remove the two 11 mm screws.

    • Remove the battery cover.

  2. iRobot Roomba 890 IR Sensor Replacement: stap 2, afbeelding 1 van 2 iRobot Roomba 890 IR Sensor Replacement: stap 2, afbeelding 2 van 2
    • Pull directly up on the grey pull-tabs to remove the battery.

  3. iRobot Roomba 890 IR Sensor Replacement: stap 3, afbeelding 1 van 1
    • Use a Phillips #2 screwdriver to remove the one 7.7 mm screw.

    • Remove the yellow brush head.

  4. iRobot Roomba 890 IR Sensor Replacement: stap 4, afbeelding 1 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 4, afbeelding 2 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 4, afbeelding 3 van 3
    • Use a Phillips #2 screwdriver to unscrew the two 11 mm screws.

    • Lift the baseplate up and off.

  5. iRobot Roomba 890 IR Sensor Replacement: stap 5, afbeelding 1 van 2 iRobot Roomba 890 IR Sensor Replacement: stap 5, afbeelding 2 van 2
    • Use a Phillips #1 screwdriver to remove the ten 9.3 mm screws.

    • Remove the bumper retainer ring.

  6. iRobot Roomba 890 IR Sensor Replacement: stap 6, afbeelding 1 van 2 iRobot Roomba 890 IR Sensor Replacement: stap 6, afbeelding 2 van 2
    • Use a Phillips #2 screwdriver to remove the two 7.5 mm screws holding the IR sensor in place.

  7. iRobot Roomba 890 IR Sensor Replacement: stap 7, afbeelding 1 van 2 iRobot Roomba 890 IR Sensor Replacement: stap 7, afbeelding 2 van 2
    • Use an iFixit opening tool to remove the outer plastic covering from the top of the Roomba.

  8. iRobot Roomba 890 IR Sensor Replacement: stap 8, afbeelding 1 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 8, afbeelding 2 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 8, afbeelding 3 van 3
    • Use a Phillips #1 screwdriver to remove the two 9.5 mm handlebar screws; then remove the handle.

    • Use a Phillips #1 screwdriver to remove the fourteen 9.5 mm top plate screws.

    • Lift off the top plate.

  9. iRobot Roomba 890 IR Sensor Replacement: stap 9, afbeelding 1 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 9, afbeelding 2 van 3 iRobot Roomba 890 IR Sensor Replacement: stap 9, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Tweezers
    $3.99
    Koop
    • Use a pair of angled tweezers to firmly grip the IR sensor plug, and pull it directly backwards to release it from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Caeden Foxhoven

Lid sinds: 03/28/22

331 Reputatie

2 handleidingen geschreven

Team

UMass Dartmouth, Team 1-3, Petersen Spring 2022 Lid van UMass Dartmouth, Team 1-3, Petersen Spring 2022

UMASSD-PETERSEN-S22S1G3

3 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 35

Altijd: 786