Inleiding
Error code 6 was driving me crazy. The roomba would not move and keep saying Error Code 6, move roomba to new location. After a few days of troubleshooting, the solution was:
1: firmly press on the front top of the roomba, above the front wheel. This will adjust the front wheel back into place and not send a signal that it is on a cliff.
-
-
Error code 6 was driving me crazy. The roomba would not move and keep saying Error Code 6, move roomba to new location. After a few days of troubleshooting, the solution was: 1: firmly press on the front top of the roomba, above the front wheel. This will adjust the front wheel back into place and not send a signal that it is on a cliff.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Één opmerking
I was also facing an error in Roomba and it was like error 2 I googled to get the solution and found something online called Roomba Error 2. Now looking here for a solution for error 6.
