Repareer je spullen Gemeenschap Winkel

iRobot Roomba 690 Spinning Brush Replacement

Inleiding

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

Wat je nodig hebt

  1. iRobot Roomba 690 Spinning Brush Replacement, Spinning Brush: stap 1, afbeelding 1 van 1

    • Place the Roomba upside down so that the wheels and brushes are facing upward.

    Bewerken

  3. iRobot Roomba 690 Spinning Brush Replacement: stap 2, afbeelding 1 van 3 iRobot Roomba 690 Spinning Brush Replacement: stap 2, afbeelding 2 van 3 iRobot Roomba 690 Spinning Brush Replacement: stap 2, afbeelding 3 van 3

    • Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.

    • Remove the spinning brush from the vacuum.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

John Galvin

Lid sinds: 03/23/22

584 Reputatie

5 handleidingen geschreven

Medailles: 6

+3 andere badges

Team

UMass Dartmouth, Team 1-1, Botvin Spring 2022 Lid van UMass Dartmouth, Team 1-1, Botvin Spring 2022

UMASSD-BOTVIN-S22S1G1

2 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 14

Altijd: 170