Ga door naar hoofdinhoud

Inleiding

This guide explains how to quickly remove the side brush from your Roomba in order to either replace it or to further disassemble the device.

Onderdelen

Geen onderdelen opgegeven.

  1. Place your Roomba upside-down on a hard surface.
    • Place your Roomba upside-down on a hard surface.

  2. Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen
  3. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  4. Gently pull upwards on the brush to remove it.
    • Gently pull upwards on the brush to remove it.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Aaron Jacobs

Lid sinds: 31-01-14

534 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 13-14, Regan Winter 2014 Lid van Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Leden

13 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 260