Inleiding

This is an easy guide. It should only take a few minutes to complete and it doesn't require any tools.

Gereedschap

Geen gereedschap nodig.

Onderdelen

Geen onderdelen nodig.

Lay the Roomba upside down on a flat surface with the blue strip away from you.
  • Lay the Roomba upside down on a flat surface with the blue strip away from you.

Voeg opmerking toe

Use your index fingers to pull the yellow tabs towards you.
  • Use your index fingers to pull the yellow tabs towards you.

  • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

  • For reassembly, make sure to push in the brush guard until it clicks into place.

Voeg opmerking toe

  • Pull back the brush guard to unhook it from the latches.

  • Remove the brush guard by lifting it up and out of the Roomba.

  • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

Voeg opmerking toe

  • Set the brush guard aside.

  • The main brush is the bristly one that is closest to the blue strip.

Voeg opmerking toe

  • Remove the main brush by grabbing it and pulling it up and out of the Roomba.

  • For reassembly, orient the Roomba with the battery closest to you:

    • First, insert the black end of the main brush into the black square opening on the right side.

    • Second, lay the main brush back into place.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

Lid sinds: 13-01-14

501 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-5, Forte Winter 2014 Lid van Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 4

Altijd: 393