Ga door naar hoofdinhoud

iRobot Roomba 4100 Brush Guard Replacement

  1. iRobot Roomba 4100 Brush Guard Replacement, Brush Guard: stap 1, afbeelding 1 van 1
    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

  2. iRobot Roomba 4100 Brush Guard Replacement: stap 2, afbeelding 1 van 2 iRobot Roomba 4100 Brush Guard Replacement: stap 2, afbeelding 2 van 2
    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

  3. iRobot Roomba 4100 Brush Guard Replacement: stap 3, afbeelding 1 van 1
    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

Lid sinds: 01/13/14

501 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-5, Forte Winter 2014 Lid van Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 703