iPod shuffle 3rd Generation Front Case Replacement - iFixit reparatiehandleiding

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Inleiding

Replace a scratched front case to make your iPod Shuffle like new.

Wat je nodig hebt

Stap 1 Rear Case

iPod shuffle 3rd Generation Front Case Replacement, Rear Case: stap 1, afbeelding 1 van 1

Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
Be careful when using a metal spudger, as you may scratch the outer case.

Stap 2

iPod shuffle 3rd Generation Front Case Replacement: stap 2, afbeelding 1 van 2

iPod shuffle 3rd Generation Front Case Replacement: stap 2, afbeelding 2 van 2

Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

Stap 3

iPod shuffle 3rd Generation Front Case Replacement: stap 3, afbeelding 1 van 1

Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
Pry the rear case away from the front case.

Stap 4

iPod shuffle 3rd Generation Front Case Replacement: stap 4, afbeelding 1 van 1

Lift the bottom of the rear case and remove it from the rest of the iPod.

Stap 5 Logic Board

iPod shuffle 3rd Generation Front Case Replacement, Logic Board: stap 5, afbeelding 1 van 1

Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

Stap 6

iPod shuffle 3rd Generation Front Case Replacement: stap 6, afbeelding 1 van 1

Remove the single Phillips screw securing the logic board to the front case.

Stap 7

iPod shuffle 3rd Generation Front Case Replacement: stap 7, afbeelding 1 van 1

Peel the battery up from the front case with an iPod opening tool.
Remove the logic board and battery from the iPod.

Stap 8 Headphone Jack & Shuffle Switch

iPod shuffle 3rd Generation Front Case Replacement, Headphone Jack & Shuffle Switch: stap 8, afbeelding 1 van 1

Pry the headphone jack from the front case with an iPod opening tool.
Don't attempt to remove the headphone jack yet, it is connected to the shuffle switch.

Stap 9

iPod shuffle 3rd Generation Front Case Replacement: stap 9, afbeelding 1 van 1

Using the pointed tip of a spudger, push the shuffle switch in to separate it from the front case.

Stap 10

iPod shuffle 3rd Generation Front Case Replacement: stap 10, afbeelding 1 van 1

Remove the headphone jack and shuffle switch from the front case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Matthew Newsom

Lid sinds: 01/05/10

39.496 Reputatie

67 handleidingen geschreven

+44 andere badges

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 11

Altijd: 6,493