Ga door naar hoofdinhoud

iPod Shuffle 3rd Generation Rear Case Replacement

Wat je nodig hebt

  1. iPod Shuffle 3rd Generation Rear Case Replacement, Rear Case: stap 1, afbeelding 1 van 1
    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

  2. iPod Shuffle 3rd Generation Rear Case Replacement: stap 2, afbeelding 1 van 2 iPod Shuffle 3rd Generation Rear Case Replacement: stap 2, afbeelding 2 van 2
    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

  3. iPod Shuffle 3rd Generation Rear Case Replacement: stap 3, afbeelding 1 van 1
    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

  4. iPod Shuffle 3rd Generation Rear Case Replacement: stap 4, afbeelding 1 van 1
    • Lift the bottom of the rear case and remove it from the rest of the iPod.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Matthew Newsom

Lid sinds: 01/05/10

39.452 Reputatie

67 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 14

Altijd: 8,074