Ga door naar hoofdinhoud

iPod Nano 2nd Generation Bottom Bezel Replacement

Wat je nodig hebt

  1. iPod Nano 2nd Generation Bottom Bezel Replacement, Bottom Bezel: stap 1, afbeelding 1 van 1
    • Before opening your iPod, ensure that the hold switch is in the locked position.

  2. iPod Nano 2nd Generation Bottom Bezel Replacement: stap 2, afbeelding 1 van 1
    • When removing the the bottom bezel, be sure not to bend the plastic surrounding the dock connector.

    • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic bezel

    • Lift the bottom bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

iRobot

Lid sinds: 09/24/09

1 Reputatie

636 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 23

Altijd: 14,684