Repareer je spullen Gemeenschap Winkel

iPhone XS Pentalobe Screws Replacement

Inleiding

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Wat je nodig hebt

  1. iPhone XS Pentalobe Screws Replacement, Pentalobe Screws: stap 1, afbeelding 1 van 1

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

14 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Jeff Suovanen

Lid sinds: 08/06/13

427.853 Reputatie

259 handleidingen geschreven

Medailles: 48

+45 andere badges

Team

iFixit Lid van iFixit

Staff

135 Leden

16.732 handleidingen geschreven

2 opmerkingen

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - Antwoord

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 11

Afgelopen 7 dagen: 45

Afgelopen 30 dagen: 160

Altijd: 12,916