iPhone 6 Plus Anti-Clamp Opening Procedure

Stap 1 Anti-Clamp instructions


Gereedschap gebruikt in deze stap:
Anti-Clamp
$24.95
Koop



• The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.
• For complete instructions on how to use the Anti-Clamp, check out this guide.
• Pull the blue handle backwards to unlock the Anti-Clamp's arms.
• Slide the arms over either the left or right edge of your iPhone.
• Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.
• Squeeze the cups together to apply suction to the desired area.
• If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use tape to create a grippier surface.
Bewerken
Voeg een opmerking toe
Voeg een opmerking toe
Voeg opmerking toe
1024
Annuleren Plaats opmerking
Stap 2




• Pull the blue handle forwards to lock the arms.
• Turn the handle clockwise 360 degrees or until the cups start to stretch.
• Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.
• Insert an opening pick or tool under the screen when the Anti-Clamp creates a large enough gap.
• If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.
• Don't crank more than a quarter turn at a time, and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.
• Skip the next three steps.
Bewerken
2 commentaren
Voeg een opmerking toe
Voeg opmerking toe
1024
Annuleren Plaats opmerking

Auteur

met 9 andere bijdragers

Walter Galan

694.692 Reputatie

1.203 handleidingen geschreven

Medailles: 54

• 
• 
• 

+51 andere badges

Deze handleiding insluiten

Kies een formaat en kopieer de code hieronder om deze handleiding als een kleine widget op je website of forum in te sluiten.

Voorbeeld