Ga door naar hoofdinhoud

Inleiding

Prereq only for rear case.

Onderdelen

Geen onderdelen opgegeven.

  1. The next step requires peeling up the Lightning connector and headphone jack cable that is affixed to the inside of the rear case with mild adhesive. We highly recommend using an iOpener on the lower backside of the rear case to soften the adhesive.
    • The next step requires peeling up the Lightning connector and headphone jack cable that is affixed to the inside of the rear case with mild adhesive. We highly recommend using an iOpener on the lower backside of the rear case to soften the adhesive.

  2. Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case. Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom. Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.
    • Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case.

    • Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.

  3. Insert the pick underneath the right bottom corner of the Lightning connector and headphone jack cable.
    • Insert the pick underneath the right bottom corner of the Lightning connector and headphone jack cable.

  4. Run the opening pick across the top of Lightning connector and headphone jack cable to loosen the adhesive securing it to the rear case. Run the opening pick across the top of Lightning connector and headphone jack cable to loosen the adhesive securing it to the rear case.
    • Run the opening pick across the top of Lightning connector and headphone jack cable to loosen the adhesive securing it to the rear case.

  5. Lift and remove the Lightning connector and headphone jack cable assembly out of the iPhone.
    • Lift and remove the Lightning connector and headphone jack cable assembly out of the iPhone.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 427