Ga door naar hoofdinhoud

iPhone 5 headphone jack for music remote control to wait for headphones

    • Step 1: Carefully loosen the dust in the headphone jack with a soft tool (such as a toothpick) and remove it.

  1. iPhone 5 headphone jack for music remote control to wait for headphones: stap 2, afbeelding 1 van 1
    • Roll a piece of very fine sandpaper (about 1cm x 2cm) into a thin roll and carefully sand the deposits inside the headphone jack. Caution: The round pins that make contact between the jack plug and the headphone jack should not be damaged.

Conclusie

Repeat the steps in order to reassemble your device.

4 andere personen hebben deze handleiding voltooid.

Met dank aan deze vertalers:

de en

100%

irlanda helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›

RustyOcean

Lid sinds: 10/09/15

118 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 2

Altijd: 381