Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

iPhone 4S Upper Antenna Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPhone 4S Upper Antenna Replacement, Upper Antenna: stap 1, afbeelding 1 van 1
    • Remove the 2.4 mm Phillips screw next to the headphone jack.

  2. iPhone 4S Upper Antenna Replacement: stap 2, afbeelding 1 van 2 iPhone 4S Upper Antenna Replacement: stap 2, afbeelding 2 van 2
    • Use the edge of a plastic opening tool to peel the upper antenna off the headphone jack.

    • Use a pair of tweezers to remove the upper antenna from the iPhone.

    • Before reassembly, be sure to clean the metal-to-metal contact point on the upper antenna (not the mating halves of its connector) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 506