Ga door naar hoofdinhoud

iPhone 4S Dock Connector Cable Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPhone 4S Dock Connector Cable Replacement, Dock Connector Cable: stap 1, afbeelding 1 van 2 iPhone 4S Dock Connector Cable Replacement, Dock Connector Cable: stap 1, afbeelding 2 van 2
    • Remove the following screws securing the dock connector cable cover to the logic board:

    • One 1.5 mm Phillips screw

    • One 1.2 mm Phillips screw

    • Remove the metal dock connector cable cover.

  2. iPhone 4S Dock Connector Cable Replacement: stap 2, afbeelding 1 van 1
    • Use the edge of a plastic opening tool to pry the dock cable up from its socket on the logic board.

  3. iPhone 4S Dock Connector Cable Replacement: stap 3, afbeelding 1 van 1
    • Peel the dock connector cable off the adhesive securing it to the logic board and the side of the speaker enclosure.

  4. iPhone 4S Dock Connector Cable Replacement: stap 4, afbeelding 1 van 2 iPhone 4S Dock Connector Cable Replacement: stap 4, afbeelding 2 van 2
    • Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.

    • De-route the cellular antenna cable out from under the metal fingers attached to the logic board.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Één opmerking

tres belle c'est manifique

nabiljemjami92 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,888