Inleiding

Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.

Gereedschap

Geen gereedschap nodig.

Before we proceed, let's make sure you have the correct tools for the job.
  • Before we proceed, let's make sure you have the correct tools for the job.

  • iFixit's iPhone 4/4S Liberation Kit includes:

    • One 5-Point Pentalobe screwdriver

    • One #000 Phillips screwdriver

    • Two 3.6 mm "Liberation" Phillips screws

  • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

Voeg opmerking toe

Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
  • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

Voeg opmerking toe

Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card. Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).
  • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

  • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

Voeg opmerking toe

Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.
  • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

  • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

45 andere personen hebben deze handleiding voltooid.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 35

Altijd: 32,056