Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

iPad mini 4 LTE Display Assembly Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPad mini 4 LTE Display Assembly Replacement, Display Assembly: stap 1, afbeelding 1 van 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: stap 1, afbeelding 2 van 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: stap 1, afbeelding 3 van 3
    • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

    • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

    • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

  2. iPad mini 4 LTE Display Assembly Replacement: stap 2, afbeelding 1 van 1
    • Remove the display assembly.

    • To reinstall your display assembly, you will need to replace the display adhesive. Use our display adhesive application guide to reapply your display adhesive and reseal your device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Lid sinds: 02/05/15

223.223 Reputatie

168 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 292