Ga door naar hoofdinhoud

iPad Mini CDMA Small Metal Bracket Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPad Mini CDMA Small Metal Bracket Replacement, Small Metal Bracket: stap 1, afbeelding 1 van 3 iPad Mini CDMA Small Metal Bracket Replacement, Small Metal Bracket: stap 1, afbeelding 2 van 3 iPad Mini CDMA Small Metal Bracket Replacement, Small Metal Bracket: stap 1, afbeelding 3 van 3
    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Peel the tape up the rest of the way with tweezers, and remove it from the bracket.

  2. iPad Mini CDMA Small Metal Bracket Replacement: stap 2, afbeelding 1 van 2 iPad Mini CDMA Small Metal Bracket Replacement: stap 2, afbeelding 2 van 2
    • Use a plastic opening tool to push the metal bracket slightly to the left.

  3. iPad Mini CDMA Small Metal Bracket Replacement: stap 3, afbeelding 1 van 2 iPad Mini CDMA Small Metal Bracket Replacement: stap 3, afbeelding 2 van 2
    • Use the tip of a spudger to lift up the lower side of the metal bracket.

  4. iPad Mini CDMA Small Metal Bracket Replacement: stap 4, afbeelding 1 van 2 iPad Mini CDMA Small Metal Bracket Replacement: stap 4, afbeelding 2 van 2
    • Grab the bracket with tweezers and lift it up out of the iPad.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 119