Ga door naar hoofdinhoud

iPad 3 4G Electrical Tape Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPad 3 4G Electrical Tape Replacement, Electrical Tape: stap 1, afbeelding 1 van 2 iPad 3 4G Electrical Tape Replacement, Electrical Tape: stap 1, afbeelding 2 van 2
    • If present, remove the pieces of electrical tape covering the Wi-Fi antenna, speaker cable, and dock connector cable.

    No, you just need to remove the other piece of electrical tape - the L-shaped to the right of the thumb.

    ilconte - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 106