Ga door naar hoofdinhoud

Inleiding

Internal Prerequisite

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the seven screws securing the logic board to the rear aluminum panel.
    • Remove the seven screws securing the logic board to the rear aluminum panel.

    • Six 2.1mm Phillips #00

    • One 2.5mm Phillips #00

  2. Flip the logic board over, minding any cables that may get caught.
    • Flip the logic board over, minding any cables that may get caught.

    • Using the tip of a spudger, remove the three antenna connectors from their sockets on the logic board.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Lid sinds: 12-04-10

113.640 Reputatie

143 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

104 Leden

9.229 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 2

Altijd: 44