Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

Pre-req only

Onderdelen

Geen onderdelen opgegeven.

  1. Peel off the tape holding the optical drive in place. Remove the two 7.1 mm T10 torx screws.
    • Peel off the tape holding the optical drive in place.

    • Remove the two 7.1 mm T10 torx screws.

  2. Firmly grab the optical drive connector and pull it straight out of the optical drive. Remove the optical drive from the device. Remove the optical drive from the device.
    • Firmly grab the optical drive connector and pull it straight out of the optical drive.

    • Remove the optical drive from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

Lid sinds: 05-03-12

82.930 Reputatie

132 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 532