Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Internal Prerequisite.

  1. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.
    • Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.

  2. Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.
    • Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.

  3. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits
  4. Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac. Pull the top edge of the hard drive slightly away from the rear case.
    • Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac.

    • Pull the top edge of the hard drive slightly away from the rear case.

  5. Lift the hard drive off its bottom retaining posts and remove it from the iMac.
    • Lift the hard drive off its bottom retaining posts and remove it from the iMac.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 258