Ga door naar hoofdinhoud

Inleiding

Prerequisite only guide for removing the hard drive assembly from a 21.5" Retina 4K Late 2015 iMac.

Onderdelen

Geen onderdelen opgegeven.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

  2. Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen
  3. Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive. Remove the hard drive assembly from the iMac. Remove the hard drive assembly from the iMac.
    • Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive.

    • Remove the hard drive assembly from the iMac.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Lid sinds: 05-02-15

173.662 Reputatie

177 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

101 Leden

9.057 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 12

Altijd: 156