Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Prereq only for removing the AirPort/Bluetooth card from the logic board.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.
    • Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.

  2. Slightly lift the AirPort/Bluetooth card and pull it straight out its socket. Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket. When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.
    • Slightly lift the AirPort/Bluetooth card and pull it straight out its socket.

    • Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket.

    • When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.

    • If the AirPort/Bluetooth card is properly seated, its screw holes should align with those on the logic board.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Lid sinds: 05-02-15

195.380 Reputatie

178 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

129 Leden

12.560 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 78