Inleiding

Use this guide to replace the access door on the bottom edge of your iMac.

Onderdelen

Geen onderdelen nodig.

  1. Unplug your iMac's AC cord along with any peripheral devices.
    • Unplug your iMac's AC cord along with any peripheral devices.

    • Lay your iMac face-down on a soft, clean surface as shown.

    • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • All three screws will remain captive in the access door.

    • Remove the access door.

    Before beginning unplug your iMac.

    Henry Barnett - Antwoord

    The screws are not phillips #1 as implied above. My phillips#2 bit fit.

    John McWilliams - Antwoord

    Yes phillips #2 is the correct Bit

    Heath - Antwoord

  2. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 7

Afgelopen 30 Dagen: 40

Altijd: 5,985