Ga door naar hoofdinhoud

iMac Intel 20" EMC 2266 RAM Replacement

Wat je nodig hebt

  1. iMac Intel 20" EMC 2266 RAM Replacement, Access Door: stap 1, afbeelding 1 van 1
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

  2. iMac Intel 20" EMC 2266 RAM Replacement, RAM: stap 2, afbeelding 1 van 2 iMac Intel 20" EMC 2266 RAM Replacement, RAM: stap 2, afbeelding 2 van 2
    • Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  3. iMac Intel 20" EMC 2266 RAM Replacement: stap 3, afbeelding 1 van 1
    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

Conclusie

To reassemble your device, follow these instructions in reverse order.

91 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 23

Altijd: 37,617