Inleiding

Upgrade your RAM DIMM Module for more memory.

Onderdelen

Geen onderdelen nodig.

Place the computer monitor face down on a safe, harmless surface. Using a  Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.
  • Place the computer monitor face down on a safe, harmless surface.

  • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

Voeg opmerking toe

Remove the metal plate from bottom of the iMac G4.
  • Remove the metal plate from bottom of the iMac G4.

  • The four screws do not completely separate from the metal plate.

Voeg opmerking toe

Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM. These tabs lock the module in place and releasing them will cause the module to "pop" up.
  • Release the tabs on each side of the module by simultaneously pushing each tab away from the RAM.

  • These tabs lock the module in place and releasing them will cause the module to "pop" up.

  • Remove the RAM module from the iMac.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

Ryan Kozak

Lid sinds: 10-10-11

1.091 reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 5-32, Amido Fall 2011 Lid van Cal Poly, Team 5-32, Amido Fall 2011

CPSU-AMIDO-F11S5G32

4 Leden

8 handleidingen geschreven

Één commentaar

Please correct the title, this is a 144 pin SODIMM, it is not a DIMM

The 168 pin DIMM is used in the internal socket.

Canadaram - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 14

Altijd: 4,326