Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Use a Y000 driver to remove three 1.1 mm screws from one side of the display EMI shield.

If you have trouble loosening these screws, press the driver harder onto the screw as you turn it. If necessary, use the flat edge of your spudger to brace each display clip from behind so you can apply more pressure to the screws, without bending the clips.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.