Ga door naar hoofdinhoud
Bewerken van stap 6 —

Stap type:

Sleep om te herschikken

Repeat the previous heating and cutting procedure for the remaining three sides of the phone.

Leave an opening pick on each side as you continue to the next to prevent the adhesive from resealing.

When inserting the opening picks into the side of the phone, insert a long edge of the opening pick, instead of a point, to avoid putting extra stress on the screen.

Use a little extra caution when prying near the top edge so as not to damage the front-facing sensors and earpiece speaker.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.