Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

To remove the optical drive thermal sensor, use the tip of a spudger to lift the center finger of the thermal sensor bracket while applying slight tension to the thermal sensor cable.

If your thermal sensor is stuck to the optical drive, use the flat end of a spudger to pry the thermal sensor bracket off the drive.

If the adhesive on the bracket refuses to stick, apply some double stick tape to the underside of both flat bracket ears.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.