Skip to main content
Help
Bewerken van stap 3 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.

The suction cup will not make a good seal on the curved portion of the glass.

If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.

Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.