Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 17 —

Stap type:

Sleep om te herschikken

Use a spudger to remove the tape/sticker.

Be very gentle as the connector is a hard-to-remove ribbon cable with several small cables. Ripping one of them will damage the ribbon cable, and will thereby damage the screen.

It is recommended to use an IC extractor to remove the LCD connector (however, you can use two small flathead screwdrivers or tweezers to slide the connector out of the socket).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.