Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Gently lift the keyboard up.

Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).

Carefully open the lid with a spudger and slide the ribbon cable out of the connector.

Be very gently with the cable and the connector because the lid may come loose. If this happens, it is difficult to put the cable and the connector back in.

Close the lid again, after removing the cable, so that the cable cannot jump out.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.