Ga door naar hoofdinhoud
Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Use a T5 Torx driver to remove the two 3.1 mm screws securing the battery board.

These screws lie under the battery board data cable. You may need to gently maneuver the cable from side to side to access each screw.

Either screw may have a water damage indicator sticker on the top. If so, remove it with a pair of tweezers and set it aside before removing the screw.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.