Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Use the spudger to push in the white tab on the square circuit board attached to the front case.

Use your finger to pull back the black plastic mount on the right side of the circuit board.

While holding back the black plastic mount, use the tweezers to gently lift the ribbon attached to the circuit board.

The ribbon and circuit board should both detach from the front case.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.