Ga door naar hoofdinhoud
Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

The RAM is now exposed.

Push the two metal clamps on the sides outwards. The DIMM flips up. If it doesn't, be very careful about forcing anything - you're working with tiny and fairly vulnerably tech here.

To remove the memory, grip it by the sides - do not touch the flat part with any kind of force - and pull it out in the direction it's pointing.

Take the new stick and place it in the same diagonal position. Verify that it is in the socket all the way and properly aligned.

Push it down - again by holding the sides as much as possible - until the clamps audibly click shut.

Make sure the clamps snugly fit into the notches on the side of the DIMM. If this isn't the case the stick is probably not inserted all the way, so carefully take it out again, check the slot for dirt or other obstructions and retry.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.